EWA17 Series Slewing Drive

• Manlift platforms for slewing booms and baskets, Lightweight cranes
• Machine attachments, such as concrete demolition pincers, picker arms, and rotary forklifts
• Handling devices (automation technology)
• Loading and unloading devices
• Positioning devices/turntables, including solar trackers

Check the Slew Drive

When disassembling the slew drive, the outer ring of the slew drive should be connected with the upper carriage, and the inner circle should be combined with the lower vehicle. The sealing ring on the slew drive should be cleaned and put in place. The suitable crane should separate the equipment, and the screws and bolts on the slew drive should be removed. Cover the steel ball and isolation sleeve completely, and check the steel ball and isolation sleeve. To prevent the steel ball, clean it and put it in the sunlight to see whether there are pits or pits on the steel ball. If there is a crack or damage on the isolation sleeve, it is necessary to replace it in time.

Maintenance and Inspection of Slewing Drive

The slew drive raceway should be filled with grease regularly. Generally, ball bearings should be oiled every 100 hours, and roller bearings should be lubricated every 50 hours. The lubrication cycle should be shortened in a unique working environment, such as tropical, humidity, dust, temperature difference, and continuous operation. The machine must also be filled with new grease before and after a long-term shutdown. The raceway must be filled with grease every time until it seeps from the sealing belt. Rotate the slew drive slowly to fill the grease evenly when filling grease.

The tooth surface should always be cleaned of debris and coated with the corresponding grease. After the first 100 hours of operation of the slew drive, the bolt preload should be checked, and then it should be checked every 500 hours. Sufficient preload must be maintained. Pay attention to the operation of the slew drive during use. In case of noise, impact, and sudden power increase, the machine should be shut down immediately for inspection and troubleshooting. If necessary, it should be disassembled for inspection. It is forbidden to wash the slew drive directly with water to prevent ice and snow from entering the raceway. Strictly control challenging foreign matters from approaching or entering the gear meshing area. Check the sealing condition regularly. If the sealing bag is damaged, it should be replaced in time. If it is found to fall off, it should be reset in time.

Why Choose Our Slewing Drives?

With the tenet of operating with integrity and serving all customers, our company is constantly working on new technologies and machines for double worm slewing drives, small slewing drives, large slewing bearings, worm slewing bearings, and slewing bearing replacements. We focus on creating our brand with many seasoned terms and top-notch equipment. You deserve our products. Products in Europe, America, Australia, St. Petersburg, Bahamas, Peru, and Sydney will be supplied worldwide. We hope to establish a long-term cooperative relationship with all customers and hope that we can improve our competitiveness and achieve a win-win with our customers. We sincerely welcome customers from all over the world to contact us for anything you need! All customers at home and abroad are welcome to visit our factory. We hope to establish a win-win business relationship with you for a better tomorrow.

Our slewing drives are available in a large variety of standard design sizes. We will gladly develop a slewing drive tailored to your requirements if you are looking for an individual solution.

Contact us – we will be happy to help you!